Elshine srl

MOTORIZED PROJECTORS

MOVING HEAD MARTIN MAC 2000 PERFORMANCE
The MAC 2000 Performance features a mechanized framing system and gobo animation module as well as a gobo and effect wheel, CMY system and much more. Features • 1200 W short arc discharge lamp • CMY colour mixing system • Variable CTC • Motorized zoom and focus • Optional wide-angle lens • Mechanical dimming • Gobo animation wheel with full movement / direction control • 5 indexable rotating gobos plus open • Variable frost, 9-facet prism and beam expander • Motorized iris • Automated framing system • Rapid strobe effects (up to 10 Hz) • Pan and tilt range of 540°/267° • Variable fan control for quieter operation • Modular design for easy maintenance and servicing • Electronic ballast with hot lamp restrike and flicker free light
Physical Length: 408 mm Width: 490 mm Height: 743 mm, head straight up Weight: 39.5 kg LampType: 1200 W short arc discharge Fitted as standard: Philips MSR 1200 SA/DE Gold Colour temperature: 6000 KCRI (Colour rendering index): >85 Average lifetime: 750 hours Hot restrike: Yes Socket: Double-ended SFc 10-4 with key Ballast: Electronic Approved alternative lamp(s): Osram HTI 1200 D7/60 SharXS Dynamic Effects Colour mixing: CMY, independently variable 0 - 100% Colour temperature control: 0 - 178 mireds, continuously variable Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction Rotating gobo wheel: 5 interchangeable gobos + open, indexing, continuous gobo rotation, shake Four-blade framing system: Blade tilting +/- 31°, frame rotation +/- 45° Effect wheel: Wide-angle converter lens, non-rotating 9-facet prism, variable frostMechanical dimmer: 0 - 100% Shutter: Strobe effect up to 10 Hz, pulse effects, instant open and blackoutIris: 15 - 100% diameter, pulse effects Focus: 2 m to infinity Zoom: 10° - 28° (14° - 35° with wide angle converter lens on effect wheel selected) Pan: 540°Tilt: 267° Control and Programming DMX channels: 28/31 Setting and addressing: Control panel with display16-bit control: Rotating gobos, pan & tilt Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link ConstructionColour(s): Black Housing: UV-resistant fibre-reinforced composite Reflector: Glass, cold light Protection rating: IP 20 Gobos Outside diameter: 37.5 mm +0/- 0.3 mm Maximum image diameter: 30 mm Maximum thickness: Glass max. 7 mm (up to 3 mm can be spring-mounted), metal max. 1.1 mm Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminium coating Recommended metal: 0.5 mm aluminium Installation Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible Orientation: Any Connections AC power input: 3 m integral cable without power plug DMX data in/out: 3-pin and 5-pin locking XLR Electrical AC power: 100-120/208-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuse: 15 AT (x 2, for use with 208-240 V power) Main fuse: 20 AT (x 2, for use with 100-120 V power) Thermal Cooling: Filtered forced air (temperature-regulated) Maximum ambient temperature (Ta max.): 40° C Maximum surface temperature, steady state, Ta=40° C: 140° C Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 5230 / 5120 BTU/hr
INDEX
MOVING HEAD MARTIN MAC 2000 WASH
The MAC 2000 Wash is the industry´s wash light of choice. It is exceptionally powerful with a clean, even, soft-edged beam, a motorized zoom and rich CMY colour mixing supplemented with two colour wheels. Features • 1200 W short arc discharge lamp • CMY colour mixing system • 2 x 4 position colour wheels plus open • Variable CTC • Motorized zoom • Flexibility of lens options - Fresnel, PC and super-wide • Mechanical dimming • Rapid strobe effects (up to 10 Hz) • Pan and tilt range of 540°/267° • Variable fan control for quieter operation • Modular design for easy maintenance and servicing • Electronic ballast with hot lamp restrike and flicker free light
Physical Length: 408 mm Width: 490 mm Height: 750 mm, head straight up Weight: 43 kg LampType: 1200 W short arc discharge Fitted as standard: Philips MSR 1200 SA/DE Gold Colour temperature: 6000 KCRI (Colour rendering index): >85 Average lifetime: 750 hours Hot restrike: Yes Socket: Double-ended SFc 10-4 with key Ballast: Electronic Approved alternative lamp(s): Osram HTI 1200 D7/60 SharXS Dynamic Effects Colour mixing: CMY, independently variable 0 - 100% Colour correction: 0 - 178 mireds, continuously variable Colour wheel: 2 wheels, each with 4 interchangeable filters + open position Mechanical dimmer: 0 - 100% Shutter: Strobe effect up to 10 Hz, pulse effects, instant open and blackout Zoom: Standard Fresnel 11° - 40°, PC 12° - 34°, super wide 66° - 80°, all with 50 mm aperture ring Hyper mode: Narrow beam with diffuser removed Pan: 540°Tilt: 267° Control and Programming DMX channels: 19/21 Setting and addressing: Control panel with LED display16-bit control: Pan & tilt Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link Construction Colour(s): BlackHousing: UV-resistant fibre-reinforced composite Reflector: Glass, cold light Protection rating: IP 20 Installation Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible Orientation: Any Connections AC power input: 3 m integral cable without power plug DMX data in/out: 3-pin and 5-pin locking XLR Electrical AC power: 100-120/208-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuse: 15 AT (x 2, for use with 208-240 V power) Main fuse: 20 AT (x 2, for use with 100-120 V power) ThermalCooling: Filtered forced air (temperature-regulated) Maximum ambient temperature (Ta max.): 40° C Maximum surface temperature, steady state, Ta=40° C: 140° C Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 5120 BTU/hr.
INDEX
MOVING HEAD CLAY PAKY ALPHA 1.200W SPOT
Alpha Spot 1200 is an extremely bright 1200W effects projector with the following highlights: Linear Zoom 15° - 40°, Color Mixing CMY, Graphic System with 14 gobo + Animation disc, linear CTO. Alpha Spot 1200 also offers some original features: a wheel with 7 colors that can be easily replaced with the same number of gobos, fixed Gobo Wheel with interchangeable gobos, new "dynamic" Animation Disc interchangeable with other Animation or Graphic Discs. Alpha Spot 1200 offers a truly remarkable price/performance ratio and a brightness that is difficultly equalled by any other projector available on the market.
MORE INFO Exclusive optics • Exceptionally reliable 1200W metal iodide lamp. • Optical unit with optimal luminous efficiency. • 15° - 40° Electronic Linear Zoom. • Electronic focusing. A total color system • CMY color mixing. • 7 Color wheel with pure and selected colors. • Linear CTO. A great effects section • Graphic system (14 gobos + 1 Animation disc) - 1 Rotating Gobo wheel with 6 bidirectional, indexable and easily interchangeable gobos. Selectable "Gobo shake" function. "Morphing" effect. - 1 wheel with 8 Fixed and easily interchangeable Gobos, variable rotation and selectable "Gobo shake" function. -Ø 120 mm Animation Disc that may be used alone or in combination with gobos, equipped with "fast clamping" system to quickly switch with other animation discs, or with Graphic Discs. The Animation Disc can be directed both vertically and horizontally: this allows the effect and its movement to be reproduced in any projection position. • 9 - faced prism + 2 frost filters. • High speed mechanical Iris. • A state-of-the-art 0-100% Dimmer. • Stop / strobe effect. Multiple and useful functions • Long life self-charging buffer battery. • Pre-set macros. • "ENERGY SAVING" function: with the stop or total dimmer effect on, consumption cut by 50%. • 115/230 V switchable power supply. • ON/OFF lamp control from the lighting desk. • Function reset from the lighting desk. • "HELP" function in the menu. • "MEMO" function. • "AUTOTEST" function. • Possibility to upgrade the software through the DMX 512 input. • ETHERNET connection. • Electronic control on each parameter. • DMX level monitoring on each channel. • Feedback information for each sensor and encoder. • Electronic repositioning of the effects. Alpha Spot 1200 is an (Silent Version) projector. TECHNICAL DATA • Power supplies 200 - 240V 50/60Hz 100 - 120V 50/60Hz The power supply can be changed over with the built-in selector. • Input power 1550VA at 230V 50Hz (PFC electronic Ballast). • Lamp Metal iodide 1200W lamp. - Cap: SFc 10-4 - Color temperature: 6,000 K - Luminous flux: 110,000 lm - Average life: 750 h - Hot Restrike Code L10055 HTI 1200W/D7/60 Osram • Input DMX 512 • Body - Aluminium structure with die-cast plastic cover. - Two side handles for transportation. - Device locking PAN and TILT mechanisms for transportation and maintenance. • Moving body - Angle: PAN = 450°, TILT = 252° - Maximum speeds: PAN = 4.0 sec. (360°) TILT = 3.2 sec. (252°) - Resolution: PAN = 1.76° - PAN FINE = 0.007° TILT = 0.98° - TILT FINE = 0.004° - Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit. - PAN and TILT lock on 4 and 5 positions respectively. • Cooling Forced ventilation with axial fans. • Safety devices - Bipolar circuit breaker with thermal protection. - Automatic break in power supply in case of overheating. • Recommended working position Functions in any position. • CE marking In conformity with the European Union Low Voltage Directive 73/23 and Electromagnetic Compatibility Directive 89/336.
INDEX
MOVING HEAD MARTIN MAC 700 SPOT
The MAC 700 Profile is a compact, powerful fixture with an output and optical precision beyond its peers. It combines a full CMY colour mixing system with an 8 position colour wheel and a gobo animation system for dramatic projection effects. It also features an iris, fixed gobos, rotating gobos and zoom system. Features • 700 W short arc discharge lamp • CMY colour mixing system • 8 position colour wheel plus open • Motorized zoom and focus • Mechanical dimming • Gobo animation wheel with full movement / direction control • 6 indexable rotating gobos plus open • 9 static gobos plus open • Interchangeable rotating prism • Motorized iris • Rapid strobe effects (up to 10 Hz) • Pan and tilt range of 540°/246° • Variable fan control for quieter operation • Modular design for easy maintenance and servicing • Electronic ballast with hot lamp restrike and flicker free light
Physical Length: 450 mm Width: 365 mm Height: 636 mm, head straight up Weight: 34.5 kg Lamp Type: 700 W short arc discharge Fitted as standard: Osram HTI 700/D4/75 Colour temperature: 7500 KCRI (Colour rendering index): >85 Average lifetime: 750 hours Hot restrike: Yes Socket: Double-ended SFc 10-4 with key Ballast: Electronic Dynamic Effects Colour mixing: CMY, independently variable 0 - 100% Colour wheel: 8 interchangeable dichroic filters (6 colours and 2 CTC) + open, indexing, continuous rotation, random colour Rotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shake Static gobo wheel: 9 interchangeable gobos + open, indexing, continuous rotation, random gobo Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction Prism: Interchangeable 3-facet rotating prismIris: 0 - 100%, pulse effects Mechanical dimmer: 0 - 100% Shutter: Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Focus: 2 m to infinity Zoom: 14° - 30°Pan: 540° Tilt: 246° Control and Programming DMX channels: 23/31 Setting and addressing: Control panel with LED display16-bit control: CMY, colour wheel, rotating gobos, gobo animation, mechanical dimmer, focus, zoom, pan & tilt Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link Construction Colour(s): BlackHousing: UV-resistant fibre-reinforced composite Reflector: Glass, cold light Protection rating: IP 20 Gobos Outside diameter: 27.9 mm +0/- 0.3 mm Maximum image diameter: 23 mm Maximum thickness: 1.1 mm in static slots, 4 mm in rotating slots Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminium coating Recommended metal: 0.5 mm aluminium Installation Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Connections AC power input: 3 m integral cable without power plugDMX data in/out: 3-pin and 5-pin locking XLR Electrical AC power: 100-120/208-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuse (100-120 V power): 15 AT (slow blow)Main fuse (208-240 V power): 6.3 AT (slow blow) Thermal Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Maximum surface temperature, steady state, Ta=40° C: 160° C Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 3340 / 3190
INDEX
MOVING HEAD MARTIN MAC 700 WASH
The MAC 700 Wash is an exceptionally powerful wash light with a clean, even, soft-edged beam, a motorized zoom, indexible beamshaper and rich CMY colour mixing. Features • 700 W short arc discharge lamp • CMY colour mixing system • 8 position colour wheel plus open • Variable CTC • Motorized zoom • Mechanical dimming • Indexing & rotating beamshaper • Rapid strobe effects (up to 10 Hz) • Pan and tilt range of 540°/246° • Variable fan control for quieter operation • Modular design for easy maintenance and servicing • Electronic ballast with hot lamp restrike and flicker free light
Physical Length: 450 mm Width: 365 mm Height: 656 mm, head straight up Weight: 32 kg Lamp Type: 700 W short arc discharge Fitted as standard: Osram HTI 700/D4/75 Colour temperature: 7500 KCRI (Colour rendering index): >85 Average lifetime: 750 hoursHot restrike: YesSocket: Double-ended SFc 10-4 with key Ballast: Electronic Dynamic EffectsColour mixing: CMY, independently variable 0 - 100% Colour wheel: 8 interchangeable filters (5 colours, UV, half minus green, CTC) + open Colour temperature control: 0 - 100% Mechanical dimmer: 0 - 100% Shutter: Strobe effect 2 - 10 Hz, random strobe, pulse effects Beamshaper: 0° - 360° indexable, continuous rotation Zoom: 12.5° - 66° Pan: 540° Tilt: 246° Control and Programming DMX channels: 16/23 Setting and addressing: Control panel with LED display16-bit control: CMY, CTC, colour wheel, mechanical dimmer, zoom, pan & tilt Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link Construction Colour(s): Black Housing: UV-resistant fibre-reinforced composite Reflector: Glass, cold light Protection rating: IP 20 Installation Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Connections AC power input: 3 m integral cable without power plug DMX data in/out: 3-pin and 5-pin locking XLR Electrical AC power: 100-120/208-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuse (100-120 V power): 15 AT (slow blow) Main fuse (208-240 V power): 6.3 AT (slow blow) Thermal Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Maximum surface temperature, steady state, Ta=40° C: 160° C Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 3340 / 3190 BTU/hr.
INDEX
MOVING HEAD CLAY PAKY 575 ALPHA SPOT HPE
A high performance spot, "full color system", bright, light, handy, silent, with an innovative look, a wide effects section and an extraordinary Zoom, that adapts to any professional or entertaining setting.
MORE INFO Exclusive optics • Exceptionally reliable 575 W metal iodide lamp. • New optical unit with optimal luminous efficiency. • 10° - 40° electronic linear zoom (10,4° - 38,2°). • Electronic focusing. A total color system • CMY color mixing. • 7 Color wheel with pure and selected colors. • Linear CTO. An unprecedented effects section • Graphic system (20 gobos and 1 Animation Disc). - 2 rotating gobo wheels, each one with 6 bi-directional, indexable and easily interchangeable gobos. Selectable "Gobo shake" function. "Morphing" effect. - 1 wheel with 8 fixed gobos, variable rotation and selectable "gobo shake" function. Magnetic "fast clamping" system to quickly switch with other gobo wheels personalized upon request. -Ø 120 mm Animation Disc that may be used alone or in combination with gobos, equipped with magnetic "fast clamping" system to quickly switch with other animation discs. • 2 bi-directional rotating prisms (2-sided and 5-sided prism). • 3 frost filters. • High speed mechanical iris. • A state-of-the-art 0-100% dimmer on a dedicated channel. • Stop / strobe effect. Multiple and useful functions • Long life self-charging buffer battery. • Pre-set macros. • "ENERGY SAVING" function: with the stop or total dimmer effect on, consumption cut by 50%. • 115/230 V switchable power supply. • ON/OFF lamp control from the lighting desk. • Function reset from the lighting desk. • "HELP" function in the menu. • "MEMO" function. • "AUTOTEST" function. • Possibility to upgrade the software through the DMX 512 input. • ETHERNET connection. • Electronic control on each parameter. • DMX level monitoring on each channel. • Feedback information for each sensor and encoder. • Electronic repositioning of the effects. • PAN and TILT lock on 4 and 5 positions respectively. • Easy access to inside projector. Alpha Spot HPE is an (Silent Version) projector. TECHNICAL DATA • Power supplies 200 - 240V 50/60Hz 100 - 120V 50/60Hz The power supply can be changed over with the built-in selector. • Input power 950VA at 230V 50Hz (PFC electronic Ballast). • Lamp 575W metal iodide lamp. - Cap: SFc 10 -4 - Color temperature: 6,000 K - Luminous flux: 49,000 lm - Average life: 1,000 h - Hot lamp restrike. Code L10029 HMI 575W/GS lamp Code L10073 CSR 575W/DE lamp • Input DMX 512 • Body - Aluminium structure with die-cast plastic cover. - Two side handles for transportation. - Device locking PAN and TILT mechanisms for transportation and maintenance. • Moving body - Angle: PAN = 450°, TILT = 252° - Maximum speeds: PAN = 4.0 sec. (360°) TILT = 3.2 sec. (252°) - Resolution: PAN = 1.76° - PAN FINE = 0.007° TILT = 0.98° - TILT FINE = 0.004° - Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit. • Cooling Forced ventilation with axial fans. • Safety devices - Bipolar circuit breaker with thermal protection. - Automatic break in power supply in case of overheating. • Recommended working position Functions in any position. • CE marking In conformity with the European Union Low Voltage Directive 73/23 and Electromagnetic Compatibility Directive 89/336.
INDEX
MOVING HEAD CLAY PACKY 575 ALPHA WASH
Dazzling washlight with an extraordinary 4° - 80° Linear Zoom, light, handy, silent with an innovative look that adapts to any professional or entertainment setting.
MORE INFO Exclusive optics • Exceptionally reliable 575 W discharge lamp. • New optical unit with optimal luminous efficiency. • 4° - 80° electronic linear zoom (4.3° - 79.8°). • Fresnel Lens: diameter 200 mm, focal length 140 mm. Magical colors and effects • CMY color mixing. • Wheel fitted out for 4 colors, 2 of which (Congo Blue and Saturated Red) are supplied. • Linear CTO. • Light frost and heavy frost with linear variation on two separate channels. • A state-of-the-art 0-100% dimmer on a dedicated channel. • Stop / strobe effect. Multiple and useful functions • Long life self-charging buffer battery. • Pre-set macros. • "ENERGY SAVING" function: with the stop or total dimmer effect on, consumption cut by 50%. • 115/230 V switchable power supply. • ON/OFF lamp control from the lighting desk. • Function reset from the lighting desk. • "HELP" function in the menu. • "MEMO" function. • "AUTOTEST" function. • Possibility to upgrade the software through the DMX 512 input. • ETHERNET connection. • Possibility to upgrade the software through the DMX 512 input. • Electronic control on each parameter. • DMX level monitoring on each channel. • Feedback information for each sensor and encoder. • Electronic repositioning of the effects. • PAN and TILT lock on 4 and 5 positions respectively. • Easy access to inside projector. Alpha Wash is an (Silent Version) projector. • Power supplies 200 - 240V 50/60Hz 100 - 120V 50/60Hz The power supply can be changed over with the built-in selector. • Input power 850VA at 230V 50Hz (PFC electronic Ballast). • Lamp 575W metal iodide lamp. - Cap: G22 - Color temperature: 6,000 K - Luminous flux: 49,000 lm - Average life: 1,000 h - Hot lamp restrike. Code L10074 HMI 575W/SEL lamp Code L10075 MSR 575W/HR lamp • Input DMX 512 • Body - Aluminium structure with die-cast plastic cover. - Two side handles for transportation. - Device locking PAN and TILT mechanisms for transportation and maintenance. • Moving body - Angle: PAN = 450°, TILT = 252° - Maximum speeds: PAN = 4.0 sec. (360°) TILT = 3.2 sec. (252°) - Resolution: PAN = 1.76° - PAN FINE = 0.007° TILT = 0.98° - TILT FINE = 0.004° - Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit. • Cooling Forced ventilation with axial fans. • Safety devices - Bipolar circuit breaker with thermal protection. - Automatic break in power supply in case of overheating. • Recommended working position Functions in any position. • CE marking In conformity with the European Union Low Voltage Directive 73/23 and Electromagnetic Compatibility Directive 89/336.
INDEX
MOVING HEAD MARTIN MAC 500 SPOT
The MAC 500 is an automated moving head profile spotlight designed for a 575 watt discharge source. It provides 18 combinable dichroic color filters, nine static and five indexed-rotation gobos, variable iris and focus, rotating three-facet prism, continuous full-range dimming, strobe effects up to 23 Hz, and 16-bit resolution movement. The MAC 500 E is an electronic ballast version of the MAC 500. The electronic ballast provides flicker-free operation, an economic power-saving mode, compatibility with 100 and 120 volt AC supplies, and considerably lighter weight.
Physical Length: 356 mm (14.0 in) Width: 481 mm (18.9 in) Height (head at tilt limit): 673 mm (26.5 in) Weight, MAC 500: 32.8 kg (72.2 lb.) Weight, MAC 500 E: 26.1 kg (57.4 lbs) Source Lamp: 575 W discharge Base: GX 9.5 Approved models: Philips MSR 575/2, MSD 575; Osram HSR 575/2, HSD 575 Control: automatic and/or remote on/off Photometrics (Standard) Light output (standard lens, MSR 575/2 lamp): 9000 lumens Illuminance (lux or fc): 245,826 cd / distance2 (m or ft) Diameter: 0.30 x distance Field angle: 17° Measurement conditions: 230 V, 50 Hz; no color or effects applied Measurement source: Philips MSR 575/2 Photometrics (Optional) Illuminance (lux or fc): 134,298 cd / distance2 (m or ft) Diameter: 0.42 x distance Field angle: 23.5° Measurement conditions: 230 V, 50 Hz; no color or effects applied Measurement source: Philips MSR 575/2 Electromechanical effects Color wheel 1: 9 filters + open, split positions Color wheel 2: 9 filters + open, split positions Static-gobo wheel: 9 replaceable gobos + open Rotating-gobo wheel: 5 replaceable gobos + open Gobo rotation: indexible, variable speed and direction Dimmer/shutter: 0 - 100%, variable flash up to 23 Hz Rotating 3-facet prism: in/out, variable speed and direction Focus: 2 m (6.5 ft.) - infinity Iris: 0 - 85% closed Pan: 440°, 32,768 positions Tilt: 306°, 45,567 positions Control & Programming Control options: USITT DMX-512, Martin RS485 Setting and addressing: LED control panel, remote w/ uploader Firmware update: serial upload (MUF) Pan/tilt resolution: 8- or 16-bit DMX speed control: tracking and/or vector DMX channels: 12 - 16 Receiver: Opto-isolated RS-485 Data I/O: locking 3-pin XLR female; pin 1 shield, pin 2 cold (-), pin 3 hot (+) Installation Mounting points: 8 pairs of 1/4-turn locks, offset 45° Orientation: any Minimum installation distance, center-to-center: 490 mm (19.3 in) Minimum distance to combustible materials: 1.0 m (39 in) Minimum distance to illuminated surfaces: 1 m (39 in) Thermal Maximum ambient temperature (Ta): 40° C (104° F Maximum surface temperature: 80° C (176° F) Total heat dissipation: 2660 Btu/hr AC Supply AC input: 3 m trailing cable w/o cord cap Wiring options, MAC 500: 200/230/245 V, 50 Hz; 208/227 V, 60 Hz Wiring options, MAC 500 E: 100/110/120/210/220/230/240 V, 50-60 Hz Maximum power and current MAC 500 @ 230 V, 50 Hz: 780 W, 4.1 A MAC 500 E @ 230 V, 50 Hz: 700 W, 3.2 A Design standards EU EMC: EN 50 081-1, EN 50 082-1 EU safety: EN 60598-1, EN 60598-2-17 Canadian safety: CSA C22.2 No. 166* US safety: ANSI/UL 1573 Construction Housing: steel and aluminum with molded plastic covers Colors: black or white Metal finish: electrostatic powder coating Protection factor: IP 20, IP 44 with Outdoor Protection Dome Ordering information MAC 500, black: 90215000 MAC 500, white: 90215032 MAC 500 E, black: 90215200 MAC 500 E, white: 90215338 Accessories MP-2 Uploader: 90758420 Outdoor Protection Dome: 90525010 Flight case for 2 x MAC 500/600: 91510002 23.5° lens kit for bayonet-mount system: 91610015 23.5° lens kit for screw-mount system: 91610009 Focus lens (bayonet mount) retrieval tool: 50521600 Frost filter for MAC 500/RS 918, assembled: 91611003 Safety cable for head shell: 50300502 G-clamp: 91602003 Half-coupler clamp: 91602005 Gobos Diameter: 27.9 mm + 0.0 / - 0.3 mm (1.098 in. + 0.000 / - 0.012 in.) Maximum image diameter: 23 mm (0.905 in.) Thickness, rotating: 0.5 to 4 mm (0.020 to 0.157 in.) Thickness, static: 0.5 mm (0.020 in.) Glass type: high-temperature Borofloat or better Glass coating: dichroic or enhanced aluminum Metal type: aluminum (steel ok for short-term use)
INDEX
MOVING HEAD MARTIN MAC 600 WASH
The industry standard MAC 600 is a powerful wash light with a CMY color mixing system, 440° of pan and 306° of tilt and a fast and smooth movement. Features • 575 W discharge lamp • CMY color mixing system • 4 position color wheel plus open • 18°, 25° (standard) and 65° lens options • Mechanical dimming • Frost and indexable beamshaper • Rapid strobe effects (up to 8 Hz) • Pan and tilt range of 440°/306° • Quiet operation • Modular design for easy maintenance and servicing
Physical Length: 356 mm (14.0 in.) Width: 481 mm (18.9 in.) Height: 652 mm (25.7 in.), head straight up Weight: 31.5 kg (69.4 lbs.) Weight: 25.4 kg (56.0 lbs.), electronic ballast models Lamp Type: 575 W discharge Fitted as standard: Philips MSR 575/2 Color temperature: 7200 KCRI (Color rendering index): 80 Average lifetime: 1000 hours Hot restrike: No Socket: GX 9.5 Ballast: Magnetic (MAC 600), electronic (MAC 600 E) Approved alternative lamp(s): Philips MSD 575, Osram HSR 575/72 Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color wheel: 4 filters (incl. CTC) + open, full and split positions, continuous rotation Mechanical dimmer: 0 - 100% Shutter: Strobe effect up to 8 Hz, random strobe Beamshaper 1: 0° - 90° Beamshaper 2: 0° - 180° Diffuser: Variable frost filter Pan: 440°Tilt: 306° Control and Programming DMX channels: 10/12/14 Setting and addressing: Control panel with LED display16-bit control: Pan & tilt Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link Construction Color(s): Black Housing: Steel and aluminum with molded plastic covers Finish: Electrostatic powder-coated Reflector: Glass, cold light Protection rating: IP 20 Installation Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible Orientation: Any Connections AC power input: 3 m (9.8 ft.) integral cable without power plug DMX data in/out: 3-pin locking XLR Electrical AC power: 200/230/245 V, 50 Hz; 208/227 V, 60 Hz (MAC 600)AC power: 100/110/120/210/220/230/240 V, 50/60 Hz (MAC 600 E) Power supply unit: User-reconfigurable voltage and frequency settings Main fuse (100-120 V power): 10 AT (slow blow)Main fuse (200-240 V power): 6.3 AT (slow blow) Thermal Cooling: Filtered forced air (temperature-regulated) Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 140° C (284° F) Total heat dissipation (calculated, +/- 10%): 2560 BTU/hr.
INDEX
MOVING HEAD ROBE COLOR SPOT 575 E-AT
La versione con ballast elletronico del ColorSpot 575 AT offre ancor più qualità nella velocità delle operazioni, un aumento notevole della potenza luminosa, una più lunga durata della lampada e non per ultimo un ridotto consumo di corrente e un peso inferiore del proiettore. Lo stesso display LCD utilizzato sul ColorSpot1200 AT, rende il proiettore ancor più facile da utilizzare. Con la versione 575E è disponibile anche la connessione Ethernet.
Lampada: • Lampada a scarica MSR 575/2 (575W,7200°K, 750 ore di durata) • Base : GX 9,5 • Modello lampada approvato: Philips MSR 575/2 • Controllo: Automatico o on/off remoto da mixer • Ballast: Elettronico Sistema Ottico: • Parabola dicroica per la massima potenza di luce • Apertura a 15° ,18° e 22° a controllo remoto Alimentazione: • Volt: 208/230/240W AC, 50/60Hz • Assorbimento: 760 VA a 230V/50Hz Dimensioni e peso: • Altezza: 555mm (testa in posizione orizzontale) • Larghezza: 470mm • Profondità: 446mm • Peso: 26kg Temperature d’esercizio: • Massima temperatura dell’ambiente: 40° C (104° F) • Massima temperatura della carcassa: 80° C (176° F) Gobos: • Diametro esterno: filtro dicroico e gobos in vetro: 26.8mm • Diametro immagine: gobos dicorico 22mm • Spessore – gobos dicroico: 1.1mm ; gobos in vetro massimo spessore 4.0mm Settaggi e segnali di controllo: • Segnale: USITT –DMX 512 • Canali di controllo: 19-29 • Canali DMX: 4 diverse modalità • Sequenze interne pre-programmate • Display: LCD grafico blu e bianco • Risoluzione Pan/Tilt: a 16 bit • Posizionamento ruota colori 1 : a 8 o 16 bit • Posizionamento ruota colori 2 : a 8 o 16 bit • Posizionamento ruota gobos statici: a 8 o 16 bit • Posizionamento ruota gobos rotanti: a 8 o 16 bit • Frost: a 8 o 16 bit • Iris: a 8 o 16 bit • Fuoco: a 8 o 16 bit • Dimmer : a 8 o 16 bit • Velocità controllabile delle ventole • Controllo del Movimento: Tracking e Vector • Analizzatore interno per individuare eventuali errori • Porta Ethernet: Art-Net Protocol, ready for ACN • Connettore di segnale: doppio XLR a 3 e a 5 poli Effetti elettromeccanici: • Multistep Zoom motorizzato con 3 diverse aperture (15°,18° e 22°) • Ruota colori 1: 9 filtri dicroici + bianco • Ruota colori 1: 8 filtri dicroici con sistema SLOT& LOCK + bianco (inclusi il filtro di conversione, 3200K, 5600K e filtro UV) • Ruota gobos fissi: 9 gobos fissi in metallo con sistema SLOT&LOCK + bianco • Ruota gobos rotanti: 7 gobos rotanti in filtro dicroico indicizzabili con sistema SLOT&LOCK + bianco • Prisma: a 3 face rotante, con rotazione in entrambe le direzioni a velocità variabile • Effetto frost: Separato e variabile • Dimmer/Shutter: Dimmer lineare 0-100% e effetto strobo variabile • Iris: Motorizzato per diversi diametri di apertura • Fuoco: Motorizzato • Pan: 530° • Tilt: 280° Ancoraggi e blocchi: • Sistema d’ancoraggio sulla base: 8 coppie di ganci a fissaggio rapido (1/4 di giro) • Sistema d’ancoraggio rapido: 2 ganci Omega
INDEX
MOVING HEAD ROBE COLOR WASH 575
The ColorWash 575E AT Zoom is an electronic ballast version of ColorWash 575 AT Zoom, which provides flicker-free operation. The fixture offers an extremely smooth linear motorized zoom that ranges from 8 to 50°. Thanks to the zoom this fixture is ideal for all types of professional installations.
Source * Lamp: Compact high-ressure metal halide lamp * Base: GX-9.5 * Approved model: Philips MSR 575/2 * Control: Automatic and remote on/off * Ballast: Electronic Optical System * High luminous-efficiency glass reflector * Two fresnel lenses of diameters 150 and 200 mm Electrical Specification * Wiring options: EU model - 208/230/240V AC, 50/60Hz, US model - 100/120/208/230/240V AC, 50/60Hz * Power consumption: 720VA at 230V/50Hz Mechanical Specification * Height: 588 mm (23.1") - head in horizontal position * Width: 470 mm (18.5") * Depth: 446 mm (17.6") * Weight: EU model - 31 kg (68.3 lbs), US model - 34.5 kg (76.1 lbs) Thermal * Maximum ambient temperature (Ta): 40°C (104°F) * Maximum surface temperature: 80°C (176°F) Control and Programming * Protocol: USITT DMX-512 * Control channels: 16/18/19/21 * DMX channels: 4 protocol modes * Stand-alone operation * Flicker-free operation * 3-editable programs, each up to 99 steps * Built-in demo sequences * Display: 4-digit LED display * Pan/Tilt resolution: 16-bit * Colour wheel positioning: 8- or 16-bit * Zoom: 8- or 16-bit * Dimmer: 8- or 16-bit * Movement control: Tracking and vector * Built-in analyzer for easy fault finding * Data in/out: Locking 3-pin & 5-pin XLR Electromechanical Effects * Cyan: 0 - 100% * Magenta: 0 - 100% * Yellow: 0 - 100% * CTO: 0 - 100% * Colour wheel: 5 replaceable "SLOT&LOCK" colours + open * Dimmer/Shutter: Full range dimming and variable strobe effect * Zoom: 8 - 50° * Pan: 530° * Tilt: 280° Rigging * Mounting points: 4 pairs of ¼-turn locks * 2x Omega bracket with ¼-turn quick locks Optional Accessories * Module of Front wide-angle lens D200 (87° angle)
INDEX
MOVING HEAD MARTIN MINIMAC PROFILE
Il MiniMAC Profile è un proiettore automatizzato a testa mobile, montata su un braccio solo. Il suo aspetto compatto ed elegante lo rende attraente per qualsiasi tipo di applicazione, dai ristoranti alle discoteche. Offre 12 filtri a colori dicroici, 7 gobos intercambiabili rotanti, un otturatore meccanico ad alta velocità, movimento di 540° di pan per 270° di tilt, un angolo del fascio di 17° con messa a fuoco manuale, pannello di controllo LED a 3 cifre, e impostazioni dell'alimentazione selezionabili con un commutatore. Usa una sorgente luminosa a luminescenza da 150 watt e può venir fatto funzionare con controllers DMX, il telecomando Martin MC-1, e in modalità autonoma, anche con capacità master/slave. Angolo del fascio di 17°, con messa a fuoco regolabile manualmente 12 ricchi colori dicroici 7 gobos rotanti intercambiabili Effetto stroboscopico e di black-out controllabile Movimento preciso e veloce, 540° di pan per 270° di tilt pannello di controllo con display LED a 3 cifre vivida fonte luminosa a luminescenza da 150W, inclusa Impostazioni di alimentazione commutabili con un interruttore Opzioni di controllo multiple: DMX, autonomo, capacità master/slave.
Misure fisiche Lunghezza: 390 mm (15.4 in) Larghezza: 316 mm (12.4 in) Altezza: 415 mm (16.3 in) Peso: 11.8 kg (26.0 lbs) Sorgente luminosa Lampada a luminescenza Martin Metal Halide 150: 67 lm/W, 2000 hr, 5000 K Lampada a luminescenza Osram HTI 150: 67 lm/W, 750 hr, 6500 K Base: GY 9.5 Controllo: azionabile a distanza Dati fotometrici standard Emissione luminosa: 1950 lumens Illuminamento (lux o fc): 53,754 cd/distanza2 (m o ft) Diametro: 0.29 x distanza Angolo del fascio: 16.7° Condizioni di misurazione: 230 V, 50 Hz; senza effetti Sorgente luminosa impiegata nella misurazione: Martin Metal Halide 150 Effetti elettromeccanici Ruota dei colori: 12 colori + aperto, rotazione continua Ruota dei gobos: 7 gobos rotanti intercambiabili + aperto Otturatore: effetto stroboscopico variabile fino a 11.4 Hz Pan: 540° in incrementi di 0.013° Tilt: 270° in incrementi di 0.007° Controllo & programmazione Opzioni di controllo: DMX-512, MC-1, autonomo, master/slave Opzioni di attivazione in modalità autonoma: musicale, timer interno Stand-alone programs: automatic and programmable 7-scene sequence Ricevitore: RS-485 Impostazione e selezione dell'indirizzo: pannello di controllo LED, MPBB1 Uploader Aggiornamento firmware: MPBB1 Uploader Definizione pan/tilt: a 8 o 16 bit Controllo di velocità DMX: ad imitazione e/o vettoriale Canali DMX: 6 - 10 I/O dati: connettore XLR femmina a 3 pins chiudibile; pin 1 schermato, pin 2 negativo (-), pin 3 positivo (+) Installazione Punti di montaggio: 1 coppia di dispositivi di serraggio a ¼ di giro per staffa Orientamento: qualsiasi Distanza minima da materiali combustibili: 0.3 m (12 in) Distanza minima dalle superfici illuminate: 0.3 m (12 in) Spazio libero minimo attorno a ventola e fori di aerazione: 0.1 m (4 in) Minima distanza di installazione da centro a centro: 316 mm (12.4 in) Caratteristiche termiche Massima temperatura ambiente (Ta): 40° C (104° F) Massima temperatura superficiale: 60° C (140° F) Dissipazione calore totale: 700 Btu/hr Alimentazione AC Ingresso AC: zoccolo IEC maschio a 3 pins Opzioni di alimentazione: 100/120/210/230/250 V, 50/60 Hz (selezionabili con commutatore) Potenza e corrente massime 100 V: 220 W, 2.7 A 120 V: 210 W, 2.0 A 210 V: 200 W, 1.3 A 230 V: 200 W, 1.1 A 250 V: 210 W, 1.0 A
INDEX
MOVING HEAD SGM GIOTTO SPOT 400W MSR
Da anni il suo impiego nelle applicazioni professionali dello stage lighting lo hanno candidato come proiettore a testa mobile leader nella sua categoria, per prestazioni e per la sua ancora inimitata qualità della luce. Utilizzato nelle più importanti produzioni mondiali, continua tuttoggi ad essere il proiettore da 400 Watt hot restrike, preferito per resa luminosa (12.000 Lux a 5m), affidabilità e silenziosità. Giotto Spot 400 è dotato di zoom motorizzato da 9° a 24°, focus elettronico, filtri CTO, Half CTO UV, iris e frost lineari, 2 prismi rotanti, una ruota dotata di 8 gobos rotanti, 8 filtri colore ed una ruota effetti. Giotto Spot 400 è disponibile nei colori Nero, Bianco e Silver. Giotto Spot 400 è disponibile nei colori nero, bianco e silver.
CARATTERISTICHE TECNICHE LAMPADA * Lampada MSR 400HR (6.000°K) * Durata media lampada 750 H * Hot restrike * Lamp on/off remoto via DMX * Attenuazione potenza lampada in caso di sovrariscaldamento * Contaore e contaccensioni della lampada * Potenza lampada 50% dopo 7 sec. da shutter 0 o dimmer 0 COLORI * Ruota colori (personalizzabile) con 8 colori + bianco * Filtro conversione colore 3.200°K (full CTO) * Filtro conversione colore 4.000°K (half CTO) * Filtri bicolore GOBO * 4 Gobo fissi (su ruota effetti) * 8 Gobo rotanti indicizzabili EFFETTI * Frost lineare * Ruota effetti (personalizzabile) * Cambio colore con sincronismo musicale e/o blackout * Rainbow color * Luce UV * 2 Prismi rotanti (4 facce e ‘Cometa’) * Iris lineare OTTICA * Zoom motorizzato 9°-24° * Messa a fuoco motorizzata. DIMMER-OTTURATORE-STROBO * Dimmer lineare * Otturatore * Strobo 1-12 flash/secondo anche con sincronismo musicale PAN TILT * Pan 540° 2.8 sec. * Tilt 270° 1.7 sec. * 8/16 bit resolution * Riposizionamento automatico Pan/Tilt INGRESSO * Segnale di ingresso DMX 512 - RS 232 * 23 Canali DMX SETTAGGI * Settaggi via microcomputer interno visualizzabili su display * Funzione “flip” del display (rotazione 180°) * Dimmeraggio illuminazione del display * Contaore del proiettore CARATTERISTICHE ELETTRICHE * Alimentazione (universale 90/245V 50/60Hz) * Ballast Elettronico (universale 90/245V 50/60Hz) CONSUMI * Consumo 600 W * Risparmio energetico automatico in caso di inserimento blackout DIMENSIONI * (AxLxP): 68,1 x 36,5 x 41,2 cm PESO * 24,8 Kg CODICE * 020_2415 Colore nero * 020_2417 Colore bianco * 020_2421 Colore silver
INDEX
MOVING HEAD CLAY PAKY CP COLOR 400 MH
Il wash professionale a testa mobile compatto, leggero, silenzioso, essenziale e adatto per ogni budget CP Color MH “AE„ (MH = Moving Head) è derivato dall'esperienza e dal successo del CP Color 400. Offre una straordinaria capacità di colorare gli ambienti con qualsiasi tonalità cromatica richiesta, mantenendo la massima uniformità da 10° a 80° d'apertura grazie alla flessibilità d'uso dei suoi filtri opzionali. Semplicissimo da installare, è studiato per tutti quegli ambienti che privilegiano scenografie dinamiche di colore, quali teatri, studi televisivi, esibizioni live, fiere, convention e molti altri ancora. La lista di possibili applicazioni è vasta, perchè CP Color MH “AE„ è un cambiacolori pofessionale veramente versatile, con bassi costi di funzionamento (ha il rifasamento PFC incorporato) e alla portata di qualsiasi budget!
INDEX